Diol Silica Gel
BioVanix diol silica gel bulk media is typical of normal phase retention behavior when used with low-polarity mobile phases due to hydroxyl groups on the surface of the stationary phase. Diol silica gel is as widely applicable to normal-phase separations as standard silica gel but is useful in cases where separation optimization is difficult to achieve with silica. In addition, it can also be used in HILIC mode with organic/water mobile phases.
Product
Diol Silica Gel
Column Selection
| Product | BV-Diol | |
| Functional Group | dihydroxy | |
| Substrate | Porous, spherical silica particles | |
| Particle Size | 5μm | 10μm |
| Pore Size | 120Å | |
| Surface Area | 330m2/g | |
| Carbon Content | 8% | |
| End-capped | Yes | |
| Pressure Limit | 4000psi for 10um 5000psi for 5μm 6000psi for 3um |
|
| Temperature Limit | 60℃ | |
| pH Range | 2-8 | |
| Aqueous Compatibility | 95% aqueous | |
