Chromatography PMMA Microspher
Biovanix PM ion exchange chromatography media utilizes a hydrophilic polymethyl methacrylate (PMMA) as its matrix with a particle diameter of 70μm. It provides a selection of various pore sizes, enabling precise control over the pore diameter of the chromatographic medium and overcoming the limitations of traditional chromatographic media. The medium features exclusive surface modification techniques that covalently bind different ion exchange functional groups onto the hydrophilic matrix surface, yielding four types of chromatographic media: strong cation exchange (SP), strong anion exchange (Q), weak cation exchange (CM), and weak anion exchange (DEAE). This ensures a high density and uniformity of the ion exchange layer.
Advantage:
- Large molecules or viral particles can effortlessly penetrate the pores for binding;
- The structure of proteins is preserved without unfolding effects; the integrity of viral capsids is maintained;
- After hydrophilic modification of the microsphere surface, ion exchange groups are covalently bonded, leading to minimal non-specific adsorption and enhanced mechanical strength;
- Improved pore permeability allows for faster molecular mass transfer, increasing the load capacity by more than tenfold;
- Significantly enhanced thermal stability of viral adsorption on the medium reduces viral degradation, resulting in a higher yield.

PMMA 입자 선택
제품 | PM 70S | |||
매트릭스 | SP | Q | CM | DEAE |
입자 크기 | PMMA | |||
기능 그룹 | 70um | |||
모공 크기 | 100nm | |||
리간드 밀도 | 0.18 메큐/mL | 0.12meq/mL | 0.21meq/mL | 0.15meq/mL |
용량 | 115 mg Lys | 80mg BSA | 105 mg Lys | 80mg BSA |
유량 | 150~750cm/h | |||
최대 압력 | 1.0MPa | |||
pH 안정성 | 2-12 | |||
화학적 안정성 | 일반적으로 사용되는 모든 완충액, 1M 아세트산, 1M 옥시염화나트륨, 1M 염산, 70% 에탄올 30% 이소프로필 알코올, 30% 아세토니트릴, 1%SDS, 6M 구아니딘 염산염, 8M 요소 및 기타 일반적으로 사용되는 유기 용매; 강한 산화제에 노출되지 않도록 주의하세요. | |||
사용 온도 | 4~30°C | |||
스토리지 | 2~30°C, 20% 에탄올 |
제품 | PM 70M | |||
매트릭스 | SP | Q | CM | DEAE |
입자 크기 | PMMA | |||
기능 그룹 | 70um | |||
모공 크기 | 100-150nm | |||
리간드 밀도 | 0.15meq/mL | 0.12m eq/mL | 0.22meq/ mL | 0.11meq/mL |
용량 | 115 mg Lys | 80m g BSA | 105mg Lys | 80mg BSA |
유량 | 150~750cm/h | |||
최대 압력 | 0.8MPa | |||
pH 안정성 | 2-12 | |||
화학적 안정성 | 일반적으로 사용되는 모든 완충액, 1M 아세트산, 1M 옥시염화나트륨, 1M 염산, 70% 에탄올 30% 이소프로필 알코올, 30% 아세토니트릴, 1%SDS, 6M 구아니딘 염산염, 8M 요소 및 기타 일반적으로 사용되는 유기 용매; 강한 산화제에 노출되지 않도록 주의하세요. | |||
사용 온도 | 4~30°C | |||
스토리지 | 2~30°C, 20% 에탄올 |
제품 | PM 70G | |||
매트릭스 | SP | Q | CM | DEAE |
입자 크기 | PMMA | |||
기능 그룹 | 70um | |||
모공 크기 | 150-300nm | |||
리간드 밀도 | 0.11meq/mL | 0.12meq/mL | 0.10meq/mL | 0.09meq/mL |
용량 | > 70mg Lys | > 75mg BSA | > 70mg Lys | > 60mg BSA |
유량 | 150~750cm/h | |||
최대 압력 | 0.5MPa | |||
pH 안정성 | 2-12 | |||
화학적 안정성 | 일반적으로 사용되는 모든 완충액, 1M 아세트산, 1M 옥시 염화나트륨, 1M 염산, 70% 에탄올 30% 이소프로필 알코올, 30% 아세토니트릴, 1%SDS, 6M 구아니딘염산염, 8M 요소 및 기타 일반적으로 사용되는 유기 용매; 강한 산화제에 노출되지 않도록 주의하세요. | |||
사용 온도 | 4~30°C | |||
스토리지 | 2~30°C, 20% 에탄올 |
제품 | PM 70G | |||
매트릭스 | SP | Q | CM | DEAE |
입자 크기 | PMMA | |||
기능 그룹 | 70um | |||
모공 크기 | 150-300nm | |||
리간드 밀도 | 0.11meq/mL | 0.12meq/mL | 0.10meq/mL | 0.09meq/ mL |
용량 | > 70mg Lys | > 75mg BSA | > 70m g Lys | > 60mg BSA |
유량 | 150~750cm/h | |||
최대 압력 | 0.5MPa | |||
pH 안정성 | 2-12 | |||
화학적 안정성 | 일반적으로 사용되는 모든 완충액, 1M 아세트산, 1M 옥시 염화나트륨, 1M 염산, 70% 에탄올 30% 이소프로필 알코올, 30% 아세토니트릴, 1%SDS, 6M 구아니딘염산염, 8M 요소 및 기타 일반적으로 사용되는 유기 용매; 강한 산화제에 노출되지 않도록 주의하세요. | |||
사용 온도 | 4~30°C | |||
스토리지 | 2~30°C, 20% 에탄올 |
제품 | PM 70V | |||
매트릭스 | SP | Q | CM | DEAE |
입자 크기 | PMMA | |||
기능 그룹 | 70um | |||
모공 크기 | 300-400nm | |||
리간드 밀도 | 0.11meq/mL | 0.12meq/mL | 0.10meq/mL | 0.09meq/ mL |
용량 | > 70mg Lys | > 75mg BSA | > 70m g Lys | > 60mg BSA |
유량 | 150~750cm/h | |||
최대 압력 | 0.5MPa | |||
pH 안정성 | 2-12 | |||
화학적 안정성 | 일반적으로 사용되는 모든 완충액, 1M 아세트산, 1M 옥시 염화나트륨, 1M 염산, 70% 에탄올 30% 이소프로필 알코올, 30% 아세토니트릴, 1%SDS, 6M 구아니딘염산염, 8M 요소 및 기타 일반적으로 사용되는 유기 용매; 강한 산화제에 노출되지 않도록 주의하세요. | |||
사용 온도 | 4~30°C | |||
스토리지 | 2~30°C, 20% 에탄올 |