ASTM Designation For GC Column
| ASTM Designation | Testing Method | Method Title | Recommended GC Columns |
| D1945 | GC | Standard test method for the analysis of natural gas | GC-PLOT MoleSieve, 15mx0.53mmx50μmGC-PLOT Q, 15mx0.53mmx30μm |
| D1946 | GC | Standard test method for the analysis of reformed gas | GC-PLOT MoleSieve, 15mx0.53mmx50μmGC-PLOT Q, 15mx0.53mmx30μm |
| D1983 | GLC of methyl ether | Standard practice for measuring volatile organic matter in water | GC-INOWAX, 30mx0.25mmx0.25μm |
| D2163 | GC | Standard test method for the analysis of liquified petroleum gases and propene concentration | GC-PLOT Al2O3 “KCl”, 30mx0.53mmx15μmGC-PLOT Al2O3 “S”, 50mx0.53mmx15μm |
| D2268 | Capillary GC | Standard test method for the analysis of fatty acid compositions | GC-1, 60mx0.25mmx0.5μm |
| D2306 | GC | Standard test method for C8 aromatic hydrocarbons | GC-INOWAX, 60mx0.25mmx0.25μm |
| D2426 | GC | Standard test method for the butadiene dimer and styrene in butadiene concentration | GC-1, 30mx0.53mmx5.0μm |
| D2427 | GC | Standard test method for determination of C2 through C5 hydrocarbons in gasoline | GC-1, 30mx0.53mmx5.0μmGC-PLOT Al2O3 “M”, 30mx0.53mmx15μm |
| D2504 | GC | Standard test method for noncondensable gases in C2 and for lighter hydrocarbon products | GC-PLOT MoleSieve, 30mx0.53mmx50μm |
| D2505 | GC | Standard test method for other hydrocarbons and carbon dioxide in high-purity ethylene | GC-PLOT GasPro, 60mx0.32mmx5μm |
| D2593 | GC | Standard test method for butadiene purity and hydrocarbon impurities | GC-PLOT Al2O3 “M”, 30mx0.53mmx15μm |
| D2712 | GC | Standard test method for hydrocarbon traces in concentrated propylene | GC-PLOT Al2O3“M”, 50mx0.53mmx15μm |
| D2804 | GC | Standard test method for the purity of methyl ethyl ketone | GC-INOWAX, 30mx0.53mmx1.0μm |
| Extended D2887 | GC | Standard test method for analysis of the boiling range distribution of petroleum fractions to C60 | GC-1, 10mx0.53mmx0.88μmGC-1, 5mx0.53mmx0.88μm |
| D2908 | Aqueous- injection GC | Standard test method for the purity of halogenated organic solvents | |
| D3054 | GC | Standard test method for analysis of cyclohexane | GC-1, 60mx0.32mmx0.5μm |
| D3257 | GC | Standard test method for the analysis of aromatics in mineral spirits | GC-624, 30mx0.53mmx3.0μm |
| D3329 | GC | Standard test method for the purity of methyl isobutyl ketone | GC-INOWAX, 30mx0.53mmx1.0μm |
| D3432 | GC | Standard test method for the analysis of unreacted toluene diisocyanates in urethane prepolymers and coating solutions | GC-624, 30mx0.53mmx3.0μmGC-1MS, 30mx0.32mmx1.0μm |
| D3447 | GC | Standard practice for the analysis of collected organic vapours | GC-624, 30mx0.53mmx3.0μm |
| D3534 | GC | Standard test method for the analysis of PCB’s in water | GC-1MS, 30mx0.32mmx1.0μm |
| D3545 | GC | Standard test method for the analysis of alcohol content and the purity of acetate esters | GC-624, 30mx0.53mmx3.0μm |
| D3687 | The activated charcoal tube adsorption method | Standard test method for the determination of the boiling range distribution of crude petroleum | GC-INOWAX, 30mx0.53mmx1.0μm |
| D3695 | Direct aqueous injection GC | Standard test method for the analysis of volatile alcohols in water | GC-INOWAX, 30mx0.53mmx1.0μm |
| D3760 | GC | Standard test method for the analysis of isopropylbenzene (Cumene) | GC-INOWAX, 60mx0.32mmx0.25μmGC-1, 50mx0.32mmx0.52μm |
| D3797 | GC | Standard test method for the analysis of o-xylene | GC-INOWAX, 60mx0.32mmx0.50μm |
| D3798 | GC | Standard test method for the analysis of p-xylene | GC-INOWAX, 60mx0.32mmx0.50 μm |
| D3871 | Standard test method for the analysis of purgeable organic compounds in water | Standard test method for the analysis of purgeable organic coumpounds in water | GC-624, 30mx0.53mmx3.0μm |
| D3893 | GC | Standard test method for the purity of methyl amyl ketone and methyl isoamyl ketone | GC-624, 30mx0.53mmx3.0 μm |
| D3973 | GC | Standard test method for the analysis of hydrocarbons with low molecular weights in water | GC-1, 30mx0.53mmx2.65μm |
| D4415 | GC | Standard test method for the determination of dimers in acrylic acid | GC-FFAP, 30mx0.32mmx0.25μm |
| D4424 | GC | Standard test method for butylene analyses | GC-PLOT Al2O3 “S”, 50mx0.53mmx15μm |
| D4443 | Headspace GC | Standard test method for the residual vinyl chloride monomer content in PPB in vinyl chloride homo- and copolymers | GC-1, 30mx0.53mmx2.65μm |
| D4864 | GC | Standard test method for the determination of traces of methanol in propylene concentrates | GC-INOWAX, 30mx0.53mmx1.0μmGC-PLOT Q, 30mx0.53mmx30μm |
| D4947 | GC | Standard test method for the analysis of chlordane and heptachlor residues in indoor air | GC-5, 30mx0.53mmx1.5μm |
| D4961 | GC | Standard test method for the analysis of major organic impurities in phenol produced by the cumene process | GC-PLOT Q, 15mx0.53mmx30μm |
| D4983 | Direct aqueous injection GC | Standard test method for the analysis of cyclohexylanine, morpholine, and diethylaminoethanol in water and condensed steam | GC-5MS, 30mx0.32mmx1.00μm |
| D5008 | GC | Standard test method for ethyl methyl pentonal content and the purity value of 2-ethylhexanol | GC-1, 15mx0.53mmx5.0μmGC-INOWAX, 30mx0.32mmx0.25μm |
| D5060 | GC | Standard test method for determining the impurities in high-purity ethylbenzene | GC-INOWAX, 60mx0.32mmx0.5μ |
| D5075 | GC | Standard test method for the analysis of nicotine in indoor air | GC-5, 30m x0.53mmx1.5μmGC-5, 30mx0.32mmx1.0μm |
| D5135 | Capillary GC | Standard test method for the analysis of sryreme | GC-INOWAX, 60mx0.32mmx0.5μmGC-5, 30m x0.53mmx1.5μmGC-5, 30mx0.32mmx1.0μm |
| D5303 | GC | Standard test method for the analysis of carbonyl sulfide in propylene | GC-PLOT GasPro, 30mx0.32mmx5μm |
| D5307 | GC | Standard test method for the determination of 1,1-trichloroethane and methylene chloride in stabilised trichloroethylene and tetrachloroethylene | GC-1, 7.5mx0.53mmx5.0μm |
| D5310 | Capillary GC | Standard test method for the analysis of tar acid composition | GC-5MS, 30mx0.25mmx0.25μm |
| D5316 | Standard test method for the analysis of high-purity n-heptane and iso-octane | Standard test method for 1, 2-dibromoethane and 1, 2-dibromo-3-chloropropane in water | GC-1MS, 30mx0.32mmx1.0μmGC-PLOT Q, 30mx0.53mmx30μm |
| D5317 | GC with an electron capture detector | Standard test method for the determination of chlorinated organic acid compounds in water | GC-5MS, 30mx0.25mmx0.25μm GC-1701, 30mx0.25mmx0.25μm GC-35MS, 30mx0.25mmx0.25μm |
| D5320 | GC | Standard test method for the analysis of petroleum wax | GC-1, 30mx0.53mmx3.0μmGC-624, 30mx0.32mmx1.8μm |
| D5441 | GC | Standard test method for the analysis of methyl tert-butyl ether (MTBE) | GC-PLOT Q, 30mx0.53mmx30μm |
| D5442 | GC | Standard test method for the analysis of nitrogen and phosphorus-containing pesticides in water | GC-5, 15mx0.25mmx0.25μm |
| D5475 | GC with a nitro-gen phosphorus detector | GC with a nitrogen phosphorus detector | GC-5MS, 30mx0.25mmx0.25μm GC-35MS, 30mx0.25mmx0.25μm GC-1701, 30mx0.25mmx0.25μm |
| D5501 | GC | Standard test method for the determination of ethanol content in denatured fuel ethanol | GC-1, 100mx0.25mmx0.50μm |
| D5507 | Standard test method for the determination of residual acrylonitrile monomers in styrene-acrylonitrile copolymer resins and nitrile-butadiene rubbers | Standard test method for the determination of trace organic impurities in monomer grade vinyl chloride | GC-PLOT Q 15mx0.53mmx30μmGC-PLOT U 30mx0.53mmx20 μm |
| D5508 | Headspace- capillary GC | GC and oxygen-selective flame ionisation detection | GC-PLOT Q, 30mx0.53mmx30μm |
| D5580 | GC | Standard test method for the determination of benzene, toluene, ethylbenzene, p/m-xylene, C9, and heavier aromatics, and total aromatics in finished gasoline | GC-1, 30mx0.53 mmx5.0μm |
| D5599 | GC and positive ion electron impact low resolution mass spectrometry | Standard test method for the determination of oxygenates in gasoline | GC-1, 60mx0.25mmx1.0 μm |
| D5623 | GC and sulfur selective detection | Standard test method for analysis of sulfur compounds in light petroleum liquids | GC-1, 30mx0.32mmx4.0μm |
| D5739 | Standard test method for the determination of organochlorine pesticides in water | Standard practice for oil spill source identification | GC-5, 30mx0.25mmx0.25μm |
| D5769 | GC/MS | Standard test method for the determination of benzene, toluene, and total aromatics in finished gasoline | GC-1, 60mx0.25mmx1.0μm |
| D5790 | Capillary column GC/MS | Standard practice for the measurement of purgeable organic compounds in water | GC-624, 30mx0.53mmx3.0μm |
| D5812 | Capillary column GC | GC and external calibration | GC-5MS, 30mx0.25mmx0.25μmGC-35MS, 30mx0.25mmx0.25μm |
| D5917 | Standard test method for the determination of PCBs in waste materials | Standard test method for the analysis of trace impurities in monocyclic aromatic hydrocarbons | GC-1701, 30mx0.25mmx0.25μmGC-INOWAX, 60mx0.32mmx0.25μm |
| D5986 | GC/FTIR | Standard test method for the determination of oxygenates benzene, toluene, C8-C12 aromatics, and total aromatics in finished gasoline | GC-1, 60mx0.53mmx5.0μm |
| D6144 | Capillary GC | Standard test method for the analysis of trace impurities in alpha-methylstyrene | GC-1, 60mx0.25mmx1.0μm |
| D6159 | GC | Standard test method for the determination of hydrocarbon impurities in ethylene | GC-PLOT Al2O3“KCl”, 50mx0.53mmx15μmGC-PLOT Al2O3 “M”, 50mx0.53mmx15μmGC-1, 30mx0.53mmx5.0μm |
| D6160 | GC | Standard test method for the determination of PCB’s in waste materials | GC-5MS, 30mx0.32mmx0.25μm |
| D2360 | GC | Standard test method for the analysis of trace impurities in monocylic aromatic hydrocarbons | GC-INOWAX, 60mx0.32mm x0.25μm |
| E1616 | GC | Standard test method for the analysis of acetic anhydride | GC-1, 50mx0.32mmx0.52μm |
| E1863 | GC | Standard test method for the analysis of acrylonitrile | GC-INOWAX, 30mx0.32mmx1.0μmGC-PLOT Q, 30mx0.32mmx 15.0μm |
| E202 | GC | Standard test method for the analysis of ethylene glycols and propylene glycols | GC-624, 30mx0.53mmx3.0μm |
| E475 | GC | Standard test method for the assay of di-tert-butyl peroxide | GC-5, 30mx0.53mmx5.0μm |
Biovanix
Biovanix Technology Co., Ltd. est une entreprise de biotechnologie spécialisée. Forts de notre expertise fondamentale en chromatographie liquide, nous avons stratégiquement évolué pour devenir un fournisseur complet de solutions intégrées couvrant l'ensemble du cycle de vie de la recherche, de l'analyse et de la production.
